Choose the print process
Select standard colour printing or the separate thermal-rewritable configuration.

Check the full product specification before ordering.
SKU: 651459
Choose an option to see stock
Single-sided Smart 31: choose the standard colour-printing Base Model or Rewritable configuration. Rewritable operation requires compatible thermal-rewritable cards. Check the selected printing process before ordering.
IDP SMART 31 · Original manufacturer PDF.
Check the selected configuration and bundle contents against this product listing.
Select standard colour printing or the separate thermal-rewritable configuration.
The rewritable model requires a compatible thermal-rewritable coating.
The selected printer reference identifies the supplied configuration.
Choose the standard colour-printing model or the thermal-rewritable configuration shown in the options. The rewritable model needs compatible thermal-rewritable cards. Colour-printing specifications below describe the standard model.
The IDP Smart 31 single-sided ID card printer (SMART-31S) prints one face of staff, student, visitor and membership cards. It suits designs that place the required photo, name and other information on one card face. Its automatic input hopper holds up to 80 cards.
IDP rates the YMCKO colour mode at 180 cards per hour (20 seconds per card). Monochrome is rated at 720 cards per hour. Actual job speed depends on the ribbon, print mode, encoding, design and card handling. Colour resolution is 300 dpi; 600 and 1200 dpi settings are monochrome-only modes.
Use Printer Options to choose the standard colour-printing Base Model or the Rewritable configuration. The rewritable printer requires compatible thermal-rewritable cards; it is a separate printing process. Network and encoding requirements need a separate configuration check with ACB.
The standard format is CR80, with 0.38–0.76 mm supported in the manufacturer's model specifications. Use suitable printable stock and check current drivers, software compatibility and the applicable UK warranty. For automatic two-sided printing, compare the dual-sided SMART-31 listing, or read IDP's SMART-31S specifications.

Plan the complete issuing station around your card design. The IDP 659366 YMCKO colour ribbon supports photographs, branding and black text, with a nominal 250-print capacity. For single-colour names and graphics, compare the compatible black monochrome ribbon. Ribbon consumption depends on the chosen layout and settings.
Add printable blank white PVC cards in a supported thickness, plus the IDP 659909 long cleaning-card kit. Keep unused cards clean, handle their edges and follow IDP's maintenance instructions.
The single-sided model suits a front-only staff badge, membership card or visitor pass. Prepare a clear template with room for the photograph, name and organisation. If you need automatic reverse printing for return details or terms, choose the Smart 31 dual-sided printer.
The choices currently offered are Base Model and Rewritable. Match your cards and printing process to the selected model. Contact ACB to check Ethernet, encoding or combined requirements before ordering a different configuration.
Colour printing is 300 dpi. The higher 600 and 1200 dpi settings are monochrome modes. Choose the mode for the actual design and test small text and machine-readable codes with your intended reader.
Confirm the included items with ACB before ordering. You need a supported computer, an appropriate design-software licence, compatible ribbon and blank cards. Compare the separate Smart 31 Pro printer bundle if you prefer to review a packaged setup.
For access cards, check both the printable surface and the technology required by your reader. Ask for a print test if a chip or antenna affects the surface. For occasional finished-card orders, compare our photo ID card printing service.
| Model | IDP SMART-31 single-sided configurations |
|---|---|
| Print configuration | Standard colour model or thermal-rewritable model; select the exact option |
| Colour-model resolution | 300 dpi; 600 / 1200 dpi are monochrome-only modes |
| Colour-model card stock | Approved CR80 stock, 0.38–0.76 mm |
| Rewritable-model media | Compatible thermal-rewritable cards; standard PVC is not rewrite media |
| Colour-model input | Up to 80 cards |
| Colour-model rated speeds | YMCKO: 180 cards/hour; monochrome: 720 cards/hour |
| Connection | USB in the listed base and rewritable configurations |
| Brand | IDP |
| Product code | 651459 |
| Printer Options | Rewritable, Base Model |
Check the complete manufacturer specification, selected options and included items before ordering.
Dispatch depends on the exact product and availability. Personalised cards and lanyards also need production time after artwork and proof approval. If you have an event or a required arrival date, please check with ACB before ordering.
For orders dispatched by ACB, UK letters and large letters use Royal Mail, and UK parcels use Parcelforce. Checkout shows the services and charge available for your order. Express delivery does not shorten artwork approval or production time.
Your dispatch email and account order details show the delivery references we have received. Royal Mail 24/48 provides delivery confirmation, rather than full tracking. For tracked services, use the carrier link for parcel updates.
Please contact ACB with your delivery country, postcode and order details so we can confirm the available service and delivery price before you order.
Have the product code, existing equipment or card reference, quantity and intended use ready. ACB can help you check what needs confirming.
Call 01308 426312Match the exact model, card format or attachment when choosing supplies and accessories.
CONTINUE EXPLORING
Explore more products and check the exact model, fitting or technology before ordering.

SKU: ACB-PRIMACY2S
Choose an option to see stock



