Entrust 525100-004 YMCKT Colour Ribbon (500 Sets)

Entrust 525100-004 ymckt colour ribbon

The Entrust 525100-004 YMCKT colour ribbon suits regular badge production that benefits from a larger, 500-set roll. Colour, black and topcoat panels support photographs and branded artwork in compatible Sigma DS1 and DS2 printers. Match the complete reference before ordering a replacement.

A larger roll for repeated colour printing

YMCKT combines the yellow, magenta and cyan colour panels with black detail and a clear topcoat. Use it for card faces with portraits, logos and variable text. Standardise your card template and test the output before printing a larger staff or membership batch.

Plan around 500 panel sets

The nominal rating is 500 panel sets. Actual finished-card output depends on the selected mode, the number of printed faces and setup use. For lower usage, compare the 250-set 525100-001 ribbon. Choose the capacity that suits your workload rather than leaving opened supplies unused for long periods.

DS1 and DS2 reference; check DS3 separately

Entrust lists the base 525100-004 code for DS1 and DS2. The DS3 supplies sheet identifies 525100-004-S100. Check the complete label and any regional restriction before ordering; the same YMCKT panel letters do not make all Sigma references interchangeable.

Order suitable cards and care supplies

The listed manufacturer kit includes a cleaning card and adhesive roller as well as the ribbon. Follow the printer's cleaning routine during replacement. Add suitable blank white PVC cards if needed, or confirm any preprinted or specialist stock with ACB before production.

Check the range in the Entrust Sigma supplies guide, or contact ACB with your printer and old ribbon reference.

Frequently asked questions

Is this the 250-print YMCKT roll?

No. This is the 500-set 525100-004 reference; the 250-set base reference is 525100-001.

Does the topcoat replace every lamination requirement?

No. A ribbon topcoat is different from a separate laminator applying a protective patch.

Can I use the base reference in any Sigma printer?

Confirm the complete code first. DS3 documentation uses a corresponding -S100 reference, and regional supply restrictions can apply.