Vinyl Red Top Visitor Pass Holder - 91x65mm

Red vinyl pass holder

A red vinyl pass holder displays a printed visitor or event credential with a red top bar as a visible colour cue. This listing uses the nominal 91 × 65 mm format. Choose the holder for your own pass scheme, and confirm the usable insert dimensions before producing a batch of printed credentials.

Check the pass format

The 91 × 65 mm listing identifies the holder format. Confirm the usable insert area before cutting or printing a pass to that size, particularly when the artwork runs close to the edges.

A red top bar provides a colour cue for your own visitor scheme.

Red vinyl pass holder for your setup

Choose the required quantity from 1, 5, 10, 25, 50, 100. Check that your chosen clip or lanyard fits the attachment slot and that the loaded pass hangs in the required orientation.

Keep the pocket flat when storing it. Replace a holder if the pocket or attachment point is damaged. Ask ACB to confirm insert fit for an unusual pass thickness or size.

Use colour alongside clear printed information

Red can make a chosen visitor category easier to spot at reception. Define the meaning within your own procedure and print the role or zone on the insert as well. A colour cue works best when the staff checking passes can also read the credential clearly.

Prepare a sample red vinyl pass holder with the intended insert and wearing attachment. Check that the pocket sits flat, the name is visible and any barcode scans through the material. For another part of the same scheme, compare the blue option. If the print layout needs more space, check the larger clear holder and confirm its insert fit separately.

Red vinyl pass holder: buying questions

Can red identify a restricted area?

Use red only as part of your organisation's defined pass scheme. Print the relevant area or role in words and follow the actual authorisation process; the holder colour itself does not grant access.

Should the insert be cut to the nominal holder dimensions?

Confirm the usable insert area first. The listing format does not establish the exact internal pocket size, so approve a sample before cutting or printing a large batch.

Can the holders be reused for another visitor?

Inspect the pocket and attachment point before reuse, and follow your organisation's process for replacing the printed credential. Replace damaged holders and keep stored pockets flat.

Choose the required quantity and check the selected option before adding it to your basket. For help with the card specification, artwork or a matching accessory, contact ACB.