Vinyl Yellow Top Visitor Pass Holder – 91x65mm

Yellow vinyl pass holder

A yellow vinyl pass holder displays a printed visitor or event credential with a yellow top bar as a visible colour cue. This listing uses the nominal 91 × 65 mm format. Choose the holder for your own pass scheme, and confirm the usable insert dimensions before producing a batch of printed credentials.

Check the pass format

The 91 × 65 mm listing identifies the holder format. Confirm the usable insert area before cutting or printing a pass to that size, particularly when the artwork runs close to the edges.

A yellow top bar provides a colour cue for your own visitor scheme.

Yellow vinyl pass holder for your setup

Choose the required quantity from 1, 5, 10, 25, 50, 100. Check that your chosen clip or lanyard fits the attachment slot and that the loaded pass hangs in the required orientation.

Keep the pocket flat when storing it. Replace a holder if the pocket or attachment point is damaged. Ask ACB to confirm insert fit for an unusual pass thickness or size.

Use colour alongside clear printed information

Yellow can provide a visible cue in a colour-based visitor scheme. Use clear printed identification alongside the top bar, especially where the pass must be checked quickly. Review the loaded holder under the lighting and at the viewing distance used at your reception or event.

Prepare a sample yellow vinyl pass holder with the intended insert and wearing attachment. Check that the pocket sits flat, the name is visible and any barcode scans through the material. For another part of the same scheme, compare the red option. If the print layout needs more space, check the larger clear holder and confirm its insert fit separately.

Yellow vinyl pass holder: buying questions

Does the yellow bar make the holder high-visibility safety equipment?

It is a colour feature for the pass holder. No safety-equipment rating is specified. Use the appropriate approved equipment separately where the working environment requires it.

Should the insert be cut to the nominal holder dimensions?

Confirm the usable insert area first. The listing format does not establish the exact internal pocket size, so approve a sample before cutting or printing a large batch.

Can the holders be reused for another visitor?

Inspect the pocket and attachment point before reuse, and follow your organisation's process for replacing the printed credential. Replace damaged holders and keep stored pockets flat.

Choose the required quantity and check the selected option before adding it to your basket. For help with the card specification, artwork or a matching accessory, contact ACB.