Evolis Agilia RTCL100NAAA Clear Retransfer Film (1200 Images)

Evolis RTCL100NAAA retransfer film: choosing the right supply

The Evolis RTCL100NAAA retransfer film carries the printed image onto the card in an Agilia printer. Choose this clear film when replacing the Agilia transfer supply; you also need the correct colour ribbon. Its nominal rating is 1,200 images, so plan the film and ribbon quantities together when ordering for a card run.

A separate film for the Agilia printing process

An Agilia prints the design onto film before transferring it to the card with heat. The colour ribbon creates the image; this clear film transfers it. Replacing one supply does not replace the other. Check the remaining levels of both consumables before starting a batch of staff badges or membership cards.

Pair the film with the correct colour ribbon

For full-colour artwork, compare the RT4F101E100 YMCK ribbon. For colour on the front and black details on the reverse, consider the RT5F102E100 YMCKK ribbon with a suitable duplex Agilia. These are separate products. The film's 1,200-image rating and the ribbons' 600-set ratings measure different consumables.

Order for your actual card layout

Two-sided work uses film on each printed face, so 1,200 film images should not be read as 1,200 completed double-sided cards. Allow for test prints when calculating your order. Match the full RTCL100NAAA reference to the old film box, and contact ACB with the printer model if you need a supply check.

Cards and ongoing care

Choose card stock approved for your Agilia setup. blank white PVC cards are an option to discuss for standard badges; specialist cards need a surface and material check. Follow the manufacturer's cleaning instructions when changing supplies and keep unused film protected from dust.

Frequently asked questions

Is this the same as an Avansia film?

No. Evolis lists RTCL100NAAA for Agilia and RTCL009NAA for Avansia. Match the printer and reference rather than choosing by the words 'clear film'.

Can I print with the film alone?

No. The matching Agilia ribbon is also required to create the card image.

Is this a lamination patch?

No. This is the transfer film used during retransfer printing. Any separate lamination requirement needs its own compatible equipment and supply.