Evolis

Evolis RCT023NAA Black Monochrome Ribbon - 2000 Prints

£14.90ex. VAT

SKU: RCT023NAA

Available to order

Evolis RCT023NAA black monochrome ribbon for compatible original Zenius and Primacy printers. Rated for up to 2,000 prints, with actual yield affected by the layout and print mode.

Manufacturer reference
RCT023NAA
Ribbon
Black
Nominal rating
Up to 2,000 prints; layout-dependent
Process
direct-to-card
Add to Cart
RCT023NAA
Evolis RCT023NAA Black Monochrome Ribbon - 2000 Prints
£14.90

Prices exclude VAT. Choose the exact pack or option you need.

At a glance

Match the reference

RCT023NAA identifies the consumable family.

Print format

Black consumable for the stated printing process.

Plan the print mode

Check layout, card stock and output requirements.

About this product

Evolis RCT023NAA black ribbon for single-colour printing

The Evolis RCT023NAA black ribbon prints text, barcodes and single-colour graphics on compatible cards. Its nominal capacity is up to 2,000 prints per roll. It is useful for adding names or numbers to pre-printed cards, or producing a simple black design on a suitable light card surface.

Evolis RCT023NAA black ribbon
Check the full RCT023NAA reference on the cassette or packaging before choosing a replacement.

Evolis RCT023NAA black ribbon compatibility

Match the complete reference to your original Evolis Zenius or Primacy. The current manufacturer chart lists RCT023NAA separately from the newer RCT223NAAA family. Therefore, check the exact generation before ordering for a Primacy 2 or Zenius 2. You can use the Evolis compatibility chart or ask ACB to check your existing ribbon label.

How is monochrome different from a colour ribbon?

This is a continuous black ribbon. It does not contain the yellow, magenta and cyan panels used for a full-colour photograph. If the background artwork is already printed, monochrome can add the changing cardholder details. For colour artwork, compare an approved YMCKO ribbon for your exact printer.

What affects the 2,000-print rating?

The amount of ribbon used depends on the printed area and supported ribbon-saving settings. A compact name or number layout can use a different length from a large black design. Allow for test cards and reprints, then plan supplies around your own job rather than treating the nominal figure as a guarantee.

Which cards should I use?

Choose approved, clean cards with a suitable printable surface. Our blank white PVC cards are a starting point for a conventional black-on-white design. For MIFARE cards, also check the required chip and reader system. Printing the card details does not encode the chip.

Follow your printer’s cleaning instructions, and check barcode contrast and readability using the intended reader before a batch. Keep spare ribbons in cool, dry storage away from dust and sunlight. See the Evolis monochrome ribbon datasheet for technical guidance.

Need another colour or reference? Browse our Evolis ribbon range. Have the RCT023NAA reference and printer model ready when asking ACB for help.

CONTINUE EXPLORING

More from this range.

Explore more products and check the exact model, fitting or technology before ordering.